Tadeusz Gorewoda

About

Researcher with experience in analytical chemistry, metallurgy as well as organic chemistry. Focused on analysis of materials from non-ferrous metals industry and recycling sector, especially in scope of X-ray fluorescence spectrometry , certified reference materials production and sample preparation methods. Involved in national and international projects, including Horizont programme. Works in Polish state-owned institute - Łukasiewicz Research Network - Institute of Non-Ferrous Metals as a Director of Metallurgy Department.

Work

Łukasiewicz Research Network - Institute of Non-Ferrous Metals

|

Director of the Metallurgy Centre

Poland

→

Łukasiewicz Centre

|

Host in the Challenge Process

Poland

→

Łukasiewicz Research Network - Institute of Non-Ferrous Metals

|

Director of the Centre of Analytical Chemistry

Poland

→

Łukasiewicz Research Network - Institute of Non-Ferrous Metals

|

Head of the Department

Poland

→

Institute of Non-Ferrous Metals

|

Head of the Department

Poland

→

Institute of Non-Ferrous Metals

|

Manager of the Emission Spectrometry Laboratory

Poland

→

Education

Silesian University of Technology

Poland
→
PhD

Silesian University of Technology

Poland
→
MSc. Eng.

Publications

Precise and Accurate Assessment of the Copper Scrap Composition by the X-Ray Fluorescence Spectrometry

Recycling

journal-article

Matrix Certified Reference Materials

Encyclopedia

journal-article

Development of New Series of Certified Reference Materials for Ferrosilicon Magnesium Alloys

Processes

journal-article

Implementation and Improvement of the Total Productive Maintenance Concept in an Organization

Encyclopedia

journal-article

Circular Economy Approach in Treatment of Galvanic Wastewater Employing Membrane Processes

Membranes

journal-article

Speciation of Copper in Materials from the Copper Industry – A Minireview

Analytical Letters

journal-article

Zinc Certified Reference Materials – production of a standard with a planned composition

EMC 2021, ISBN 978-3-940276-96-4; s. 1107-1119

conference-paper

Praktyczne zastosowanie metody elektrograwimetrycznej w analizie stopów miedzi

Analityka: nauka i praktyka, nr 2/2021

journal-article

Zbadanie możliwości zastosowania modyfikowanej krzemionki do zatężania i specjacji arsenu w wybranych materiałach przemysłu metali nieżelaznych

Badania i Rowój Młodych Naukowców w Polsce Chemia – procesy, materiały i polimery, Poznań 2021, ISBN 978-83-66392-91-5, 37-46

conference-paper

New process chain for the automated physical dismantling of end-of life electronics to separate and recover valuable materials at high concentration levels – progress of the European ADIR project

2nd European Mineral Processing and Recycling Congress – EMPRC 2020

conference-abstract

Determination of Metals’ Content in Components Mounted on Printed Circuit Boards from End-of-Life Mobile Phones

Recycling

journal-article

: Process line for the automated dismantling and sorting of valuable components from printed circuit boards

Proceedings Berliner Recycling- und Sekundärrohstoffkonferenz 2020

conference-paper

Metals content in components mounted on printed circuit boards from end-of-life mobile phones and routes for hydrometallurgical metals recovery developed in the European project ADIR

Copper Expert Committee 2020

conference-abstract

Microstructural Effect Limitations in the Analysis of SnAg, SnBi and SnIn Lead-free Solders by Wavelength Dispersion X-Ray Spectrometry

Journal of Analytical Chemistry

journal-article

Process line for the automated dismantling and sorting of valuable components from printed circuit boards

Berliner Recycling- und Sekundärrohstoffkonferenz

conference-paper

Analytical Results – The Base For Decisions In A Modern Technology Development Of The European Project ADIR - Wyniki analityczne - podstawa decyzji w nowoczesnej technologii rozwój projektu europejskiego ADIR

Hutnícka A Priemyselná Analytika 2019

conference-paper

Sposób otrzymania materiałów odniesienia dla stopów lutowniczych bezołowiowych cynowo – indowych

Urząd Patentowy Rzeczpospolitej Polskiej

patent

Sposób otrzymania jednorodnych materiałów odniesienia dla stopów lutowniczych bezołowiowych cynowo –bizmutowych

Urząd Patentowy Rzeczpospolitej Polskiej

patent

Certyfikowane materiały odniesienia dla przemysłu metali nieżelaznych wytworzone w ostatnich latach w ŁUKASIEWICZU – Instytucie Metali Nieżelaznych

IX Ogólnopolska Konferencja Jakość w Chemii Analitycznej

conference-abstract

Certyfikowane materiały odniesienia wytworzone w 2018 r. w Instytucie Metali Nieżelaznych

Seminarium Naukowe Aktualne Problemy Chemii Analitycznej

conference-poster

Composition of PCBs obtained from mobile phones waste

Sixth PROMETIA Annual Seminar

conference-abstract

Preparatyka próbek – zasady ogólne

IMN and Panalytical

lecture-speech

Przemysł Metali Nieżelaznych – Jakość i Analityka

Analityka Nauka i Praktyka

journal-article

Seminarium „Spektrometria XRF w teorii i praktyce”

Analityka: Nauka i Praktyka

journal-article

The analysis of tin-base solders using WDXRF and EDXRF methods - Analiza Stopów Lutowniczych Na Bazie Cyny Za Pomocą Fluorescencyjnej Spektrometrii Rentgenowskiej z dyspersją długości fali oraz dyspersją energii

Hutnícka A Priemyselná Analytika 2019

conference-paper

Wkład chemii analitycznej w opracowanie nowoczesnej technologii recyklingowej w ramach europejskiego projektu badawczego ADIR

Analityka: Nauka i Praktyka

journal-article

Zastosowanie normy PN-EN ISO 17034:2017-03 w praktyce

RM’ 2019 Pierwsza krajowa konferencja nt. materiałów odniesienia

conference-abstract

Technika cienkiej warstwy w analizie metodą XRF

conference-abstract

Wytworzenie i opracowanie serii certyfikowanych materiałów odniesienia dla stopu Bi58Sn42 – Development of series of certified reference materials for Bi58Sn42 alloy

Referenční Materiály A Mezilaboratorní Porovnávání Zkoušek VII

conference-paper

Sposób otrzymywania materiałów odniesienia dla stopów lutowniczych cynowo – cynkowych

Urząd Patentowy Rzeczpospolitej Polskiej

patent

: Działania analityczne w europejskim projekcie ADIR: next generation urban mining

Konwersatorium Spektrometrii Atomowej KOSAT 2018

conference-abstract

Od próbki do decyzji – działalność usługowa i badawcza Zakładu Chemii Analitycznej IMN

197 Kwartalna Konferencja Naukowo-Techniczna SITMN Firm Przemysłu Metali Nieżelaznych

conference-abstract

Projekty badawcze – współpraca Zakładu Chemii Analitycznej IMN i CBJ

Przemysł Metali Nieżelaznych w Polsce – Jakość i Analityka

conference-abstract

Rapid Method For Determination Of Rhenium In Ammonium Perrhenate By XRF Using Thin Layer Technique Szybka metoda oznaczania zawartości renu w renianie(VII) amonu przy pomocy fluorescencyjnej spektrometrii rentgenowskiej z zastosowaniem techniki cienkiej warstwy

Hutnícka A Priemyselná Analytika 2018

conference-paper

Screening Analysis Of Elecronic Components In The Batch Material For The European Project Adir – Next Generation Urban Mining Analiza przesiewowa komponentów elektronicznych w materiałach wsadowych dla europejskiego projektu ADIR – nowa generacja pozyskiwania surowców

Hutnícka A Priemyselná Analytika 2018

conference-paper

Wielopierwiastkowa analiza składu żużli przemysłu miedziowego obejmująca szeroki zakres zawartości wybranych analitów za pomocą fluorescencyjnej spektrometrii rentgenowskiej

Seminarium Naukowe Aktualne Problemy Chemii Analitycznej

conference-poster

Novel sample treatment procedures for the determination of phosphorus in Cu-based alloys using X-ray fluorescence spectrometry to solve the microstructural effect issue

X-Ray Spectrometry

journal-article

Analiza XRF wybranych materiałów przemysłu metali nieżelaznych – uproszczenie preparatyki próbek z zastosowaniem pastylek lepiszcza z wzorcem wewnętrznym Analysis of materials from non-ferrous metals industry by the XRF method – simplification of sample preparation using binder tablets with internal standard

Hutnícka A Priemyselná Analytika 2017, X. Slovensko – Česko – Polská Konferencia

conference-paper

Komplementarne procedury analityczne dla stopów lutowniczych typu SnPb na zgodność składu z normą ISO 9453:2014 The complementary analytical procedures for SnPb solders for their compilance with the ISO 9453:2014 standard

Hutnícka A Priemyselná Analytika 2017, X. Slovensko – Česko – Polská Konferencia

conference-paper

Next generation urban mining – Automated disassembly, separation and recovery of valuable materials from electronic equipment: overview of R&D approaches and first results of the European project ADIR

Proceedings of European Metallurgical Conference 2017

conference-paper

Novel sample treatment procedures for the determination of phosphorus in Cu-based alloys using X-ray fluorescence spectrometry to solve the microstructural effect issue

X-Ray Spectrometry

journal-article

Oznaczanie zanieczyszczeń w miedzi wysokiej czystości przy pomocy spektrometrii XRF i techniki cienkiej warstwy, po elektrolitycznym usunięciu matrycy

XI Seminarium Naukowe Aktualne Problemy Chemii Analitycznej

conference-poster

Wyzwania i rozwiązania – wybrane zagadnienia z zakresu fluorescencyjnej spektrometrii rentgenowskiej realizowane w Instytucie Metali Nieżelaznych (The Challenges And Solutions - Selected Issues Of The X-Ray Fluorescence Spectrometry In The Institute Of Non-Ferrous Metals)

Rudy i Metale Nieżelazne Recykling

journal-article

Wpływ próbkobrania twardych stopów lutowniczych na wyniki analizy XRF - Influence of sampling of hard solders on the results of XRF analysis

Hutnícka A Priemyselná Analytika 2015, XIII Slovensko – Česko – Polská Konferencia

conference-paper

Analysis of CuP alloys using XRF spectrometry: elimination or limitation of microstructural effects

European Conference on X-Ray Spectrometry EXRS 2016

conference-abstract

Automated remelting as a New sample preparation metod for analysis of Sn63Pb37 and SnAg3 solders Rusing WDXRF in the aspekt of the microstructural issue.

European Conference on X-Ray Spectrometry EXRS 2016

conference-poster

Effect of 2-picoline based ionic liquids on a structure OF Zn-Co alloy coatings oxidized anodically

Ochrona Przed Korozją

journal-article

Opracowanie metody analitycznej XRF spełniającej wymagania laboratorium przemysłowego, na przykładzie zrealizowanego projektu INNOTECH II

Konwersatorium Spektrometrii Atomowej

conference-abstract

: The development of a new sample preparation procedure for the analysis of CuAgP solder by XRF spektrometry

65th Denver X-Ray Conference – Annual Conference on Applications of X-ray Analysis

conference-abstract

Re-melting tin-bismuth and tin-indium solder samples for XRF analysis in order to eliminate microstructural effects

65th Denver X-Ray Conference – Annual Conference on Applications of X-ray Analysis

conference-abstract

Technika cienkiej warstwy w spektrometrii XRF – analiza składu stopów metali nieżelaznych

Konwersatorium Spektrometrii Atomowej

conference-abstract

Wpływ mikrostruktury próbek i materiałów odniesienia stopów lutowniczych na wyniki analizy metodą XRF

Konwersatorium Spektrometrii Atomowej

conference-abstract

Special tablets containing cellulose binder and Sr internal standard for simplifying X-ray fluorescence analysis of powder samples

Spectrochimica Acta, Part B: Atomic Spectroscopy

journal-article

Anodic treatment of Zn-Ni alloy in alkaline solutions

Solid State Phenomena

book

Badania składu chemicznego i fazowego anodowo utlenianych powłok stopowych Zn-Ni/Investigations of chemical and phase composition of anodically oxidized Zn-Ni alloy coatings

Ochrona przed Korozją

journal-article

Bioactivity of coatings formed on Ti-13Nb-13Zr alloy using plasma electrolytic oxidation

Materials Science and Engineering C

journal-article

Bioactivity of coatings formed on Ti-13Nb-13Zr alloy using plasma electrolytic oxidation

Materials Science and Engineering: C

journal-article

Determination of bromine in selected polymer materials by a wavelength-dispersive X-ray fluorescence spectrometric method - Critical thickness problem and solutions

Spectrochimica Acta - Part B Atomic Spectroscopy

journal-article

Determination of bromine in selected polymer materials by a wavelength-dispersive X-ray fluorescence spectrometric method - Critical thickness problem and solutions

Spectrochimica Acta, Part B: Atomic Spectroscopy

journal-article

Investigations of chemical and phase composition of anodically oxidized Zn-Ni alloy coatings

Ochrona Przed Korozją

journal-article

Special tablets containing cellulose binder and Sr internal standard for simplifying X-ray fluorescence analysis of powder samples

Spectrochimica Acta - Part B Atomic Spectroscopy

journal-article

Structure and mechanical properties of the SnBi and SnAg type brazing alloys,

EUROMAT

conference-poster

Wpływ budowy strukturalnej próbek miękkich stopów lutowniczych na wyniki analizy XRF - Influence of structural compositions of samples of soft solders for XRF analysis results

Hutnícka A Priemyselná Analytika 2015, XIII Slovensko – Česko – Polská Konferencia

conference-paper

Zmodyfikowana metoda dodatku wzorca w analizie rentgenofluorescencyjnej

LAB Laboratoria Aparatura Badania

journal-article

Sposób wytwarzania soli a-(N-acyloamino)alkilo-trifenylofosfoniowych

Urząd Patentowy Rzeczpospolitej Polskiej

patent

Determination of Bromine in Selected Polymer Matrixes by the WD XRF Method - Critical Thickness Problem and Solution

European Conference on XRay Spectrometry EXRS 2014

conference-abstract

Developement of new and rapid method of analysis of the main constituents in rhenium materials using thin layer XRF technique

European Conference on XRay Spectrometry EXRS 2014

conference-abstract

The development of correct methods for Sn-Pb solder analysis by wavelength dispersion X-ray fluorescence spectrometry

Spectrochimica Acta - Part B Atomic Spectroscopy

journal-article

The development of correct methods for Sn-Pb solder analysis by wavelength dispersion X-ray fluorescence spectrometry

Spectrochimica Acta, Part B: Atomic Spectroscopy

journal-article

The new pellets containing binder and internal standard - development of the preparation method and application them in technological samples preparation of XRF analysis and preparation equipment control

European Conference on XRay Spectrometry EXRS 2014

conference-abstract

Modification of a Ti-Mo alloy surface via plasma electrolytic oxidation in a solution containing calcium and phosphorus

Electrochimica Acta

journal-article

Konwersatorium Spektrometrii Atomowej 2013

Analityka: Nauka i Praktyka

journal-article

Modification of a Ti-Mo alloy surface via plasma electrolytic oxidation in a solution containing calcium and phosphorus

Electrochimica Acta

journal-article

3-Triphenylphosphonio-2,5-piperazinediones as new chiral glycine cation equivalents

Tetrahedron Asymmetry

journal-article

3-Triphenylphosphonio-2,5-piperazinediones as new chiral glycine cation equivalents

Tetrahedron Asymmetry

journal-article

Investigations on electrochemical a-methoxylation of selected dipeptides

Journal of Applied Electrochemistry

journal-article

Investigations on electrochemical alpha-methoxylation of selected dipeptides

Journal of Applied Electrochemistry

journal-article

A new application of the Mitsunobu reaction in the synthesis of phosphonium salts

Tetrahedron Letters

journal-article

A new application of the Mitsunobu reaction in the synthesis of phosphonium salts

Tetrahedron Letters

journal-article